Olympia Acrylic Plastic Emulsion is made of a special type of acrylic co-polymer. It is long lasting and alkali resistant. Stains on painted areas can be easily cleaned with soap.

Terms of Use

Venue selection and preparation: Clean the walls thoroughly before applying paint. All types of small dirt, oily coating, should be cleaned by rubbing with sandpaper. The walls must be properly dried before applying the paint.

Priming:

Proper priming is essential for best results on walls. Apply one coat of water beige sealer for new walls and one coat of oil beige sealer for old walls. It is better to use John Wall Putty for smooth and beautiful finishing. Sealer on the wall Finishing coat can be applied after at least 18-24 hours.

Finishing coat:

After priming, acrylic plastic emulsion can be applied by brush or roller. Using a brush 2 parts paint and 1 part clean water in case and 3 parts paint and 1 part clean water in case of roller Mix and dilute. Use this diluted color within 6 to 8 hours for best results have to do The next coat can be applied at least 6-8 hours after the first coat is applied.

Caution:

Do not over dilute the paint. Use the guidelines to ensure correct values. Close the container after each use. It is better not to wash the wall within 1 month of painting.